Monterey

16 - 17 August 2013

Lot 249

1986 Porsche 962 Race Car

To be auctioned on Saturday, August 17, 2013

High Bid of $650,000

  • Chassis no. 962-122


Est. 680 bhp, 2,869 cc DOHC air-cooled flat six-cylinder engine with Motec electronic fuel management and a single KKK turbocharger, five-speed manual gearbox, four-wheel independent suspension with coil springs and Bilstein dampers, and four-wheel ventilated disc brakes. Wheelbase: 109 in. (2,770 mm)

  • Ex-Rob Dyson Racing; Porsche factory chassis tub and engine
  • Comprehensive four-year restoration completed in 2011
  • Single ownership since 1992
  • Ideally prepared for vintage racing


Throughout the history of racing, there have been several occasions when changes of rules and regulations in various sanctioning bodies have ironically resulted in the development of a particularly important car. The legendary Porsche 962 GT Prototype Race Car of the 1980s is a textbook example of this paradigm. Replacing the aging 935, the 962 was actually a derivation of the 956 that had successfully campaigned in Europe during 1982 and 1983, a model that Porsche would have also offered to privateers in North America were it not for a discrepancy between IMSA’s GTP regulations and FISA’s Group C rules.

IMSA rules specifically forbade multiple turbocharged induction and pedal boxes ahead of the front-axle line, both hallmarks of the 956. Certain that some minor modifications to the 956 chassis would be far more effective than developing an entirely different platform for America, Weissach lengthened the 956 wheelbase, allowing sufficient space to place the pedal box behind the front-axle line. The 956’s twin-turbocharged, 2.6-liter motor was replaced with a single KKK-turbocharged, 2.8-liter engine derived from the 935, and the IMSA-ready 962 was essentially born.

An inauspicious factory debut at the 1984 24 Hours of Daytona, where it was driven by Mario and Michael Andretti, saw the prototype retire with gearbox trouble despite a strong start, resulting in further test work being conducted before delivery of customer cars began in April 1984. As tuning and development quickly honed the 962 chassis, the model began to truly shine, contributing to 46 wins in three years for Porsche’s various IMSA teams, including the 1986 and 1987 24 Hours of Daytona and 13 wins during the 1987 season alone. The IMSA-regulation 962 was deemed to be so successful that Porsche actually modified the design for European Group C competition, using the so-called 962C to win Le Mans in 1986 and 1987.

Chassis 962-122 was delivered new to Dyson Racing during the team’s preparation for the Continental 500 at Watkins Glen, to be held on July 6, 1986. Team principal Rob Dyson had built a solid reputation over the years, and it reached new heights with his 1985 entry into IMSA’s Camel GT Series GTP class with the acquisition of 962-101, a used 962 example once driven by Derek Bell for Bayside Disposal Racing. Still competing today, Dyson Racing is recognized by some experts as the longest-running American privateer team that has continuous support from the Porsche factory.

Chassis 962-122, the third of Dyson Racing’s 962s, was damaged during the Watkins Glen Continental 500 by driver Drake Olsen, so the Dyson team immediately sourced Richard Lloyd Racing to salvage components from the original car, which mostly consisted of body panels. The resulting car, chassis DR1 (Dyson Racing 1), sometimes referred to as 962-122A, eventually won at least two races for Dyson during 1987, but that chassis is not to be confused with the authentic 962-122 offered here.

Following the 1986 Watkins Glen incident, the original, damaged 962-122 chassis was removed from competition and retained by Dyson for possible use if the need arose, until newer chassis began to make their way into the team’s stable and the older cars were sold off. In 1989, Dyson Racing offered 962-122 to Kevin Jeannette, of Gunnar Racing in West Palm Beach, Florida, who is, perhaps, one of the leading specialists in rebuilding used 962s. During this period, Mr. Jeannette actively sought out and acquired such 962s for the purpose of rebuilding and marketing them to the historic racing niche, and 962-122 remained in his care in an unrestored state for about two years.

In 1991, Mr. Jeannette received an inquiry regarding the possibility of purchasing a 962 chassis from the consignor, a former two-time president of the PCA and a 46-year principal at one of New York’s most recognized service houses that specialize in the repair and service of Porsche race cars. The two reached an agreement for Mr. Jeannette to repair 962-122’s tub and then sell it to the consignor, who officially purchased the car on June 1992.

The minimally used 962 remained in storage with the consignor until the mid-2000s, when a full restoration commenced. Conducted at the consignor’s shop, Formula Motorsports, the 962 was completely disassembled with a full inspection and evaluation of the chassis, involving careful scrutiny of every seam and rivet. A new original-stock fuel cell with a new foam insertion was acquired from Porsche. The older Motronic fuel system management system was upgraded to a Motec unit, to ensure better reliability, improved data acquisition, and superior performance. All hydraulic components and lines were replaced or reconditioned as needed. The brake and clutch cylinders were replaced, and the brake calipers were rebuilt to factory standards and fitted with new rotors, pads, and properly anodized hardware.

The suspension, gearbox, and clutch were entirely rebuilt with proper NOS or reconditioned parts, and all articulating bearings were replaced to exceed factory specifications. The turbocharger was completely rebuilt by qualified KKK service technicians, and the intercooler was cleaned and thoroughly tested for integrity. Furthermore, the wheels were rebuilt to proper specifications and mounted with authentic 17-inch Goodyear racing tires. In short, it is believed that very few 962s have enjoyed such a complete nut-and-bolt restoration with the goal of being prepared for vintage racing applications. According to the consignor, “there are very few 962s available that can claim the originality, cleanliness, sterility, and race-readiness of this one.”

The four-year restoration was completed in 2011, after which 962-122 attended the Rennsport Reunion of 2011. Currently prepared by the consignor for a fresh campaign in historic racing, and accompanied by a thick file of restoration invoices, 962-122 would likely require very little attention to become highly competitive in vintage GTP contests. It claims the provenance of being the factory authentic, original chassis 962-122, retaining the presence of an original, Porsche-built 962 engine, and having former ownership by the esteemed Dyson Racing team. Having experienced no actual racing use, 962-122 boasts one of the most pristine and unmolested 962 chassis tubs available today. It is a sensational and authentic Porsche race car that would make for fantastic vintage GTP competition, and it is a testament to the brilliance of Weissach’s superlative 962.

Addendum

Please note that this vehicle is a race car and will, therefore, be offered on a Bill of Sale.

Please contact our exclusive automotive transportation partner, Reliable Carriers, for a shipping quote or any other information on the transport of this vehicle.

Alain Squindo


Detroit, Michigan

Alain Squindo joined RM Auctions in 2007, after graduating from Georgetown University in Washington, D.C., with a degree in History. R... read more

Alex Classick

aclassick@rmauctions.com

+44 (0) 20 7851 7070
United Kingdom

Alex Classick joined RM Europe in 2011 as a car specialist, after graduating from Nottingham University with a degree in Business Mana... read more

Alexander Weaver

aweaver@rmauctions.com

+1 310 559 4575
California, USA

Alexander Weaver joined RM Auctions in 2011 as a car specialist, after graduating from Furman University in South Carolina. Born into ... read more

Annette Abaci

aabaci@rmauctions.com

+49 (0) 40 441 95 737
Germany

With post-secondary degrees in Economic Science and Mechanical Engineering, Annette Abaci initially worked part-time at Mercedes-Benz ... read more

Augustin Sabatié-Garat

asabatie-garat@rmauctions.com

+44 (0) 20 7851 7070
United Kingdom

Augustin Sabatié-Garat joined RM Europe in 2012 as a senior car specialist, after more than a decade in the collector car hobby... read more

Dan Warrener

dwarrener@rmauctions.com

+1 519 352 4575
Ontario, Canada

Possessing a degree in Economics from Brandon University, Dan Warrener spent the initial stages of his career working around the globe... read more

Don Rose

drose@rmauctions.com

+1 617 513 0388
United States

Don Rose joined RM Auctions in 2006, after many years of professionally trading sports and classic cars, and after earning a reputatio... read more

Donnie Gould

dgould@rmauctions.com

+1 954 566 2209
Florida, USA

Donnie Gould joined the RM team in 2002 as a partner and Car Specialist after more than two decades in the vintage automobile auction ... read more

Gord Duff

gduff@rmauctions.com

+1 519 352 4575
Ontario, Canada

Gord joined RM Auctions in 1998, initially responsible for the transportation and logistics of the company’s auction and restora... read more

Ian Kelleher

ikelleher@rmauctions.com

+1 310 559 4575
New York, United States

Ian Kelleher began his automotive career immediately following his graduation from Oberlin College, with a B.A. in Politica... read more

Jack Boxstrom

jboxstrom@rmauctions.com

+1 818 703 2816
Ontario, Canada

Jack Boxstrom joined RM Auctions in late-1996 to assist with the recently acquired, and subsequently record-breaking, auction in Monte... read more

Max Girardo

mgirardo@rmauctions.com

+44 (0) 20 7851 7070
United Kingdom

Max Girardo started his career in the vintage automobile industry in 1998, joining Brooks Auctioneers (now Bonhams) as a car specialis... read more

Mike Fairbairn

mfairbairn@rmauctions.com

+1 519 352 4575
Ontario, Canada

As one of the three founding partners of RM Auctions, Mike Fairbairn has a longstanding interest in the classic car industry. Graduati... read more

Peter Wallman

pwallman@rmauctions.com

+44 (0) 20 7851 7070
United Kingdom

Peter Wallman joined RM Europe in 2007, following nearly two decades in the international advertising industry, read more

Rob Myers

+1 519 352 4575
Ontario, Canada

As chairman and founder of the RM Group of Companies, Rob Myers’s entire career has been devoted to the classic car industry. Ro... read more

Shelby Myers

smyers@rmauctions.com

+1 310 559 4575
California, USA

Shelby Myers literally grew up with the classic car industry infused into every aspect of his life. He had the unique opportunity to w... read more

Vinnie Mandzak

vmandzak@rmauctions.com

+1 310 559 4575
California, USA

Vinnie Mandzak joined RM Auctions’ California office in 2012 as a car specialist, following more than 30 years’ experience... read more